There aren’t any sudden marine machinery failures, usually. The pump gets gradually warmer each week, the shaft makes noise at an unfamiliar pitch, the compressor needs extra time to develop pressure. Each one is a warning sign that something is wearing down. Ignore that warning, and a simple fix turns into an unexpected port visit. This guide outlines the most common marine machinery failures, explains their causes, and tells how planned professional maintenance saves money from expensive repairs.

Common marine machinery failures happen mostly because of wear, lack of proper lubrication, misalignment, corrosion, and postponing the servicing process.

What Are the Common Failures in Marine Machinery?

The common marine machinery failures refer to the malfunctioning of mechanical parts of equipment responsible for the movement and anchorage of the ship. The list includes pumps, propellers, shafts, compressors, and deck machinery. Despite appearing random, there are common reasons for them:

Top Five Common Marine Machinery Failures to Look Out for

1. Pump failures

Pumps transport ballast, fuel, cooling water and bilge water. Failure of any of the pumps means failure of several systems. Reasons for such failure include seal wear, cavitation, strainer clogging and bearing wear. Symptoms of such failure include vibrations, leakage from the shaft seal and decrease of volume/pressure of fluid.

2. Propeller damage and shaft misalignment

The tiny defect in propeller will cause unbalance of the shaft line, leading to vibrations that will lead to stress of bearings and seals. The problem with shaft alignment is similar. Both failures do not show any clear signs in the early stages.

3. Compressor problems

Compressor problems often appear when air compressors do not reach the required pressure quickly. Valves oil carry over and poor cooling are frequent causes. If a compressor needs longer to reach working pressure inspect it now.

4. Deck machinery breakdowns

breakdowns happen with winches, windlasses and cranes which endure the conditions on a vessel. Salt spray, shock loads and irregular greasing take their toll. Worn gears, brake faults and seized components usually appear at the moment such as, during mooring or anchoring.

5. Corrosion and seal leaks

Corrosion problems grow slowly and patiently. It weakens fittings, supports and housings until a seal leaks or a part gives way. Surface treatment and regular inspection keep corrosion problems in check.

Why small issues can cause expensive repairs

A lot of common issues with marine equipment happen as a result of one issue causing another. For example, the seal leaks causing water to enter the bearing. This causes the bearing to overheat which causes damage to the shaft. This simple and cheap repair has now turned into a multiple part repair with the vessel waiting for spares and a berth.

The main expense comes from lost time (missing deadlines, delaying cargo, extra labour). As this is a preventative repair you dictate when it is carried out.

How professional maintenance can help prevent common issues

A good maintenance plan for your marine equipment can be quite simple. It can be done using the same routine each time:

  1. Initial inspection – Technicians will check the current state of your pumps, shafts, propeller, compressors and deck equipment.
  2. Checking – You will have data on vibration, temperature, noise and pressure which will all help identify any trends before any parts fail.
  3. Lubrication and seal inspection – Oil quality, greasing points and seals will be checked and changed as required.
  4. Alignment and balancing – Shaft lines and rotating parts will be checked and corrected.
  5. Scheduled repair/overhaul – Any worn parts will be replaced whilst in port or dry-docked.
  6. Documentation – All findings are documented so next time you can start from actual history.

Whilst this won’t eliminate all issues, the majority will be identified early on making them easier to repair.

How Often Should Marine Machinery Be Serviced?

There isn’t a set time frame, but generally speaking it should be serviced regularly to prevent common issues occurring. We recommend following the manufacturers recommendation and also your classification society guidelines. If the vessel is being used in hot, dusty or salty environments it will likely require more regular servicing. You can service during regular port visits or dry docking to keep costs down.

Practical Tips to Avoid Common Marine Machinery Failures

Conclusion

Most common issues with marine machinery can be predicted. The common causes include wearing, misalignment, lack of lubrication and corrosion. This can all be seen coming and therefore using a professional service will mean it can be planned and cost effective.

Tygnuz Marine Services LLC provide a service to vessels and offshore platforms from Dubai. Our Mechanical Works division covers pumps, propellers, shafts, compressors and deck machinery. If you would like a second opinion on your equipment, you can look at our services, get a quote or book in a consultation.

FAQs

1. What are the most common issues with marine machinery?

Pumps, propellers, shafts, compressors and deck machinery are the most commonly affected. The cause tends to be due to wearing, lack of lubrication, misalignment and corrosion. Most will show signs of an issue early on with vibrations, strange noises, leaks and pressure drops.

2. How does preventative maintenance help lower repair costs?

By implementing preventative maintenance we can identify wearing parts before they cause any issues to surrounding components. By replacing seals and bearings on time you will save a lot of money compared to having to repair a broken shaft. It also means there will be no downtime, emergency labour or waiting for spares.

3. What are the signs of an issue with machinery on a ship?

New vibrations, strange noises, increased temperatures, leaking oil or water and pressure drops. If anything has changed from usual it should be checked. Often there will be small signs of an issue which can lead to a much bigger issue on board.

4. How regularly should marine machinery be serviced?

We recommend servicing based on the manufacturer recommendations and class guidelines. If the vessel is operating in harsh conditions or is working heavily it will likely need servicing more regularly. Servicing during port visits or dry docking will also keep any disruption and costs to a minimum. Technicians will also have safe access to do the work properly.

Leave a Reply

Your email address will not be published. Required fields are marked *